Demco KarKaddy X Tow Dolly

The Demco KarKaddy X Tow Dolly lets you tow your vehicle without installing a tow bar or base plates. This powder-coated tow dolly features hydraulic disc brakes for safe, controlled stopping and a swivel platform. Fits vehicles with tread width between 42" and 78". The KarKaddy X is lower and wider than the KarKaddy SS to fit low profile, wider vehicles.

• Tow your vehicle without installing a tow bar or base plates
• Designed for lower clearance
• Hydraulic surge brake system for safe and controlled stopping
• Includes disc brakes
• Chrome wheels with radial tires and dual safety chains
• Sealed bearing hubs with a 3-year unlimited warranty
• Towed vehicle tread width 42" minimum, 78" maximum
• Load angle reduced by 4° to fit more low profile vehicles
• 5th wheel design swivel platform
• Black powder-coat finish with hot dipped galvanized components
• Sealed hubs
• Demco brake actuator and EZLatch Coupler

Specs:
Overall Width: 102"
Overall Length: 147"
Tires: ST205/75R14 load range (C) BSW radial tire
Wheels: 14" x 5.5" Nickel Chrome
Weight: 680 lbs.
Axle Capacity: 3,500 lbs.
Towed Vehicle Tread Width: 42" min., 78" max.
Maximum Towed Vehicle Body Width: 78"
EZLatch Coupler Rating: 7,500 lbs.
Total Towed Vehicle Weight: 4,800 lbs.
GVWR (unit weight plus max. carrying capacity): 3,500 lbs.

CAUTION: Read your motor vehicle owner’s manual to determine proper towing procedure. All vehicles to be towed on Demco Dollies must be towed with the front axle on the dolly. Some vehicles may be too wide in the body area to properly fit on an 8-1/2' wide dolly even though the front tire measurement is 78" or less. Always follow weight limitations when choosing a Demco Dolly. 8-1/2' wide tow dollies may be subject to width restrictions on roads in some states.